Mag-Float Replacement Pad & Felt - Medium (10mm)

The genuine replacement pad & felt is designed for

Includes

• 1 x Felt Pad - Applied to the magnet that contains the logo Mag-Float®>
• 1 x Pad - Applied to the magnet that does not contain logo Mag-Float® and goes inside the aquarium>

Instructions on how to change the pad/felt:

• Remove old pad/felt entirely without damaging the plastic surface of the magnet.
• Apply mineral spirits on a cloth and rub plastic surface until all excess glue is cleared (Use latex gloves).
• Wait until plastic surface is completely dry before applying new pad/felt.
• Peel back paper backing from new pad/felt approximately a quarter of the way.
• Line up the new pad/felt with the plastic surface area of the magnet.
• Apply pressure to the pad/felt are that has been peeled off so it glues on to the plastic surface of the magnet.
• Apply pressure to the rest of the new pad/felt as you slowly remove the rest of the paper backing (This will avoid any air bubbles to be formed between the plastic surface and pad/felt).

Mag Float Part Number - 00126